To fully enjoy your swimming pond or biopool it is important that the water is in top condition. To keep your water in top condition, you should regularly check the water values and add water treatment and water improvement agents (good pond bacteria). Discover the products of AquaForte, with which you can achieve, restore and maintain the natural balance in your swimming pond.
All water values together determine the overall water quality. Because swimming ponds are often used much more intensively than normal ponds in nature, we must offer a helping hand to achieve a healthy balance. Here you will find more information about the ideal water values for swimming ponds and biopools.
.
Long time
Liquid to lower the pH value when it is higher than 7.6 (in swimming pools). Essential for a correct water treatment, so that the skin of bathers is not irritated by a wrong balance of the pH value.
DOSIS & INSTRUCTIONS
Add 1.2 liters of product to the water to lower the pH by 0.2 units per 100 m³ water volume. This dose serves as a guideline. The perfect pH balance for swimming pools is between 7.2 – 7.6. The pH value can easily be measured with a test strip and should be carried out weekly. This product is specially formulated to be added to the swimming pool water by means of automatic measuring and dosing pumps. Composition: sulphuric acid 400 g/Kg.
| Type | Art.no. |
|---|---|
| pH min liquid 25L | TD110 |
Granulated compound which reduces the pH level of the water when it is greater than 7,6. It is essential for proper water treatment, ensuring that bathers’ skin is not irritated by a pH imbalance.
DOSE AND INSTRUCTIONS FOR USE:
Add 1.5 Kg. of product to reduce by 0,2 units per 100 m³ volume of water. This dose is meant as a guideline. The perfect pH balance should be between 7.2 – 7.6. The pH level is easily determined by using a pH and chlorine test kit and should be carried out twice daily. Pour the necessary dose in a container with water and spread the mixture evenly over the surface of the pool. COMPOSITION: sodium hydrogensulphate 1000 g/Kg.
| Type | Art.nr. |
|---|---|
| pH min granulate 1.5 kg | TD112 |
Powder compound to increase the total alkalinity in the swimming pool water when it is under 125 ppm. It is essential for ideal water conditions and to avoid a pH imbalance.
DOSE AND INSTRUCTIONS FOR USE:
Add 1,8 Kg. of product to increase by 10 ppm. total alkalinity of 100 mġ of water. This dose is a guideline. The total alkalinity of water should be between 125-150 ppm (CaCO3), and be checked by a test kit once a week. Pour the necessary dose of product dissolved in water evenly over the swimming pool surface.
COMPOSITION: sodium hydrogen carbonate 1000 g/Kg.
| Type | Art.nr. |
|---|---|
| Alkalinity booster 6 kg | TD114 |
Non foaming detergent compound eliminating dirt and grease from dirty pool edges and walls.
DOSE AND INSTRUCTIONS FOR USE:
Put product directly onto a sponge or cloth, rubbing the surface where cleaning is required. In those places where there are calcareous deposits, it will be necessary to use EXTRA DESCALER.
COMPOSITION: sodium hydroxyde 4.5 % / 2-butoxyethanol 3 %
| Type | Art.nr. |
|---|---|
| Waterline Cleaner 1L | TD128 |
| Waterline Cleaner 1L | TD130 |
Biodegradable flocculant with great flocculation power capable of removing colloid particles from swimming pool water.
DOSE AND INSTRUCTIONS FOR USE:
Maintenance treatment:
Home swimming pool: with the filtering equipment on and with no swimmers in the pool, add 40 ml of product for every 50 mġ of water every week. Commercial or busy swimming pool: treat the swimming pool water twice a week with double or triple the standard dose. Recovery treatment (cloudy water): For cloudy water, double or triple the standard dose. This guideline dose can be changed depending on the characteristics of each swimming pool, weather conditions, etc.
How to use:
-Check the filter pressure (clean if necessary).
-Pour the product dose directly into the swimming pool and spread evenly over the surface. No premixing is necessary.
-Keep the filtering system on for at least six hours after adding the product.
The product should preferably be added at dusk and without swimmers in the pool.
STEP 1: Hold the bottle upside down to fill the dosing chamber.
STEP 2: Unscrew the bottles lid.
STEP 3: Empty the dosing chamber.
SPECIFIC VOLUME. For a specific volume, tilt the bottle and let the amount required pour in.
COMPOSITION: chitosan acetate 20 g/kg
| Type | Art.nr. |
|---|---|
| Natural Clarifier 1L | TD104 |
